Desiccant dehumidification: energy savings calculator
Compares your current desiccant dehumidifier with the WaHa Vaporator® at the same duty, for the four markets where desiccant dehumidification is used. Enter your own conditions and your own equipment's energy figure. WaHa figures are the unit's design specification at the stated condition.
Units
–lower dehumidification energy
–your equipment, kg of water per kWh
–WaHa Vaporator®, kg of water per kWh
–operating cost saved per year
WaHa Vaporator® outlet air (design values)
Outlet temperature equals inlet temperature: the heat released by drying is recovered inside the unit. Leaving relative humidity is available down to 10%.
At your duty
Economics (operating cost only)
Sustainability
Keep this result
Reference conditions across the three standalone markets
Baseline figures are reference values for legacy silica gel equipment and should be replaced with your own. Savings are direct machine energy for the same water removed; heat-recovery and cooling-side benefits are not included.